beef jerky heat pump dryer

Product Description

Product Application

Dry vegetables like Radish, lettuce, pumpkin, carrots, spinach, cassava,mushroom, white fungus,peanut etc
Dry fruits like Apple, lemon, mango slices, apricot, longan, etc
Dry meat:seafood,Sausage, beef, duck, ham ect
Others it can Bamboo shoot, LDeet potato chip, noodle and rice noodle Paper, leather, wood ,stick incense,Mosquito incense, Buddha incense,herbs ,flowers,and sludge ect.

Working Principles
Heat pump dryer is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical energy, as in a refrigerator.Heat pump dryer has high COP, it will be replace boiler, Coal- fired dryers and others conventional drying machine.
The dryer(dehydration machine) operates using a heat pump where both sensible and latent heats are recovered from the exhaust air. The heat is then recycled back through the dryer by heating the air entering the adrying chamber. The heat pump drying system is a combination of two sub-systems: a heat pump and adrying chamber.
The heat pump dryer operates according to a basic air conditioning cycle involving four main components: the evaporator, the compressor, the condenser and the expansion valve.
The working fluid (refrigerant) at low pressure is vaporized in the evaporator by heat drawn from the dryer exhaust air. The compressor raises the enthalpy of the working fluid of the heat pump and discharges it as superheated vapor at high-pressure. Heat is removed from the working fluid and returned to the process air at the condenser. The working fluid is then throttled to the low-pressure line (using an expansion valve) and enters the evaporator to complete the cycle.
In the dryer system, hot and dry air at the exit of condenser is allowed to pass through the drying chamber where it gains latent heat from the material. The humid air at dryer exit then passes through the evaporator where condensation of moisture occurs as the air goes below dew point temperature.

Main Features

1) Simple structure in linear type ,easy in installation and maintation.

2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.

3) High pressure double crank to control the die opening and closing.

4) Running in a high automatization and intellectualization,no pollution

5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine .

Machine Parts

Name: Main Motor

Power: 3P

Original: China

Main Features

Name: Trolley
Mateiral: Stainess Stell 304
Original: China

Machine Parts

Name: Tray

Material: SS 304
Original: China

Main Features

Name: Drying Chamber
Original: China
The size of the drying chamber is 3.5x2.0x 2.2m (LXWXH), it consists of two units, separating by partition sheet. The material of the drying chamber and door are galvanized steel board with inner 10cm thickness polyurethane foam plate. The partition sheet is galvanized steel board with inner 10cm thickness polyurethane foam plate.

Pre-Sales Service

* Inquiry and consulting support.

* Sample testing support.

* View our Factory.

After-Sales Service

* Training how to instal the machine, training how to use the machine.

* Engineers available to service machinery overseas.

Products Name with link

91.8% Response Rate

Products Name with link

91.8% Response Rate

Products Name with link

91.8% Response Rate