accurate Intelligent V of v-cone flowmeter

If you interesting in accurate Intelligent V of v-cone flowmeter ?kindly ask me, Shandong industrial microwave oven can give technical support and service.
Please metioned below information in your inqury.
1.What's your raw material? How about the form of your products?
2.How much moisture content before drying and after drying?
3.How many input and output capacity per hour?
Once confirm above details,we can provide a suitable solution for you.

In addition,Shandong industrial microwave oven not only manufacture Microwave equipment ,but also have oil press and refined oil equipment for peanut, soybean, rapeseed, cottonseed, sunflower, sesame, animal,grape seed, acer truncatum, peony seed, walnut, hemp seed, pine, tea seed, papaya, milk thistle seed, and other special material.

Expect to help you and cooperate with you in near future.

Contact Shandong industrial microwave oven
Miss Jessica
Skype:leaderfoodmachine1
Tel:+8615964025360 (WhatsApp&Wechat)
Email:[email protected]

Specifications

Intelligent V of v-cone flowmeter
1 after straight demanding shorter, usually only 0-3D upstream and downstream only 0 to 10

accurate Intelligent V of v-cone flowmeter

with the pipe upstream pressure by throttling pieces of the downstream pressure after the throttle pressure difference between a positive and negative pressure, with selecting pressure and pressure in the pipe upstream pressure, in the end, the mouth cone by measuring the pressure difference, between the equation can be calculated according to the flow of the pipeline, pipe center, located in cone to optimize the curve of the medium velocity, high precision measurement instrument, downstream of straight section of low requirements. Third, features Improved significantly by the use of traditional differential flowmeter, improve precision and repeatability, installation, and almost no straight from the cleaning function, suitable for easy scaling smudgy medium, gas-liquid two measuring. Is a kind of close to ideal of throttle device.

1 and after straight demanding shorter, usually only 0-3D upstream and downstream only 0 to 1D. 2, high precision, and can realize differential output value of ± 0.1% of repeatability.

3, pressure loss of small, only for the orifice plates, 1/2-1/3.

4, V trailing vortex cone produces little, differential output stability, fluctuation little.

5, V, by the cone fluid retention without sundry. Four, the main technical parameters 1, precision grades: 0.5, 1.0 2, the pressure of work: 16MPa acuities 3, working temperature: - 30-45 degrees 4 and environmental temperature: - 30-70 degrees 5 and pipe diameter: 15-3000mm 6 and output signal: 4-20mA Seven, the power supply voltage 24V DC. 8 and applicable medium: almost applies to all gas (including dirty gas), the liquid medium.